HIT Products, Company

station capability / 128 station capability 8 programs / 16 programs 8 start times per program / 16 start times per program Looping feature on program 6 and remote sensor relay to activate program 6 1 minute to 10 hr 59 minutes run time per station (all programs except 5 and 6 which are 1...

The BOC is an easy to install, simple to use single station battery operated controller. An ideal product for applications where valve(s) are isolated from an irrigation controller or a power source is difficult or cost prohibitive to access. Controller and solenoid are powered by one standard...

Available with ¾" or 1" NPT female connection Virgin PVC material construction (NSF approved material) Internal manual bleed Heavy duty co-molded diaphragm with stainless steel spring Standard 24 VAC 60 Hz solenoid (black wire) Hex plunger design for sandy water conditions IAPMO...

• Patented full open straight through flow design • Extremely low pressure loss • Low flow capability from 1 GPH • Contamination resistant with internal control water filtration with "Agitator" • Internal manual bleed operation • Manual bleed can be removed for "tamper proof" operation •...

Heavy duty internally supported wiper seal Available in 2", 3", 4", 6" and 12" pop-up heights Patented lateral flushing flush plug High impact virgin ABS plastic construction for body, piston and cap Stainless steel retraction spring Spring-loaded ratchet on all models Available with female...

Double acting telescoping piston Two independent heavy duty stainless steel retraction springs Integrally molded "Leak-Stopper" gaskets prevent any body-cap leaks 7" pop-up has overall retracted body height same as 4" pop-up body 900 Series 13" pop-up has overall retracted body height same...

Description • 3-way flexible connection from lateral pipe line to sprinkler • Available in two configurations; • SJA - Standard with one marlex street ell at sprinkler connection • SJA2 - Standard with one marlex street ell at both ends for maximum flexibility and ease in installation

Available with male or female thread to fit all HIT, Rain Pro and other brand pop-up spray bodies Provide matched precipitation rates Available in 6´, 8´, 10´, 12´ and 15´ radius - 90°, 120°, 180°, 240°, 270° and 360° patterns Special patterns; side strip 4´ x 30´, side strip 9´ x 18´, end...

Available in 4´, 6´, 8´, 10´, 12´, 15´ and 17´ radius Adjustable from 20° to 360° degrees Matched precipitation rates Color coded for easy radius identification Stainless steel screw for flow and radius adjustment High impact virgin ABS plastic construction Available with female thread or...

Stainless steel filter with agitator, for control water contamination resistance Reverse flow design for pressure balanced diaphragm Internal manual bleed with captive plunger on solenoid Co-molded diaphragm with integral stainless steel spring Offered in 18 different inlet/outlet, ¾", 1",...